The DG II Hot-Melt Hand Applicator is manufactured to precise industry specifications and is comprised of the highest quality materials for long-lasting and extended life. Astro Packaging carries a complete line of hot melt adhesive systems and custom components which include hot melt units, pumps, motors, heated hoses, modular guns, gun modules, glue nozzles and much more. DG II Hot-Melt Hand Applicator is durable, reliable, and industry compatible and carries a full warranty.

Over 40 years combined experience as authorized representatives for Nordson®, Slautterback®, ITW/Dynatec® and Graco® has given Astro Packaging the knowledge to provide our customers with unparalleled sales and service. Astro Packaging is one of the largest manufacturers of hot melt adhesive systems and replacement parts in all of North America. Our extensive inventory enables us to ship anywhere in the world overnight. With our industry trained staff, and complete line of hot melt equipment, we are able to design and support a wide variety of packaging systems to meet your specific requirements.

In addition to DG II Hot-Melt Hand Applicator, Astro Packaging also provides custom products built specifically to meet a customer’s specifications. These professional hotmelt adhesive products can be manufactured and delivered in as little as two weeks. Call our toll free number 800-642-7876 for more information or to order DG II Hot-Melt Hand Applicator.

ITW Dynatec’s APEX High Speed Slot Die Applicator is an air-operated hot melt adhesive applicator assembly with an optional filter manifold. The applicator is used with intermittent pressure and constant pressure hot melt adhesive supply units (ASUs). APEX models are offered in six different module configurations.

Each APEX High Speed Slot Die applicator features various combinations of adhesive valve slot die modules mounted to a single service block. Each module is opened and closed by air pressure. Springs are used to keep needles closed when no air pressure is supplied to the head. The rate of adhesive flow from the applicator is determined by the adhesive pressure applied by the ASU’s pump, shim thickness and the amount of shim opening.

The applicator is heated by replaceable cartridge heating elements which are controlled by an integrated RTD sensor and electronic control. A single heat zone for the service block and die allows for only one temperature control point on models less than 390mm. Models longer than 390mm have two heat zones and control points. The APEX module(s) is mounted onto either a steel or aluminium service block. A piston inside the module is pneumatically triggered by a solenoid, which allows adhesive to flow through a valve within the module.

ITW Dynatec's MOD-Plus Dyna BF applicator head is an air-operated, single or multi-nozzle hot melt adhesive applicator assembly with an integrated filter cartridge which prevents particulate matter from obstructing flow through the head. It is used with intermittent pressure and constant pressure hot melt adhesive supply units (ASUs).

Each Mod-Plus Dyna BF applicator features on or more adhesive valve modules mounted to a single service block. Each module is opened and closed by air pressure. Springs are used to keep needles closed when no air pressure is supplied to the head. The rate of adhesive flow from the applicator is determined by the adhesive pressure applied by the ASU's pump and the size of the nozzle orifice.

ITW Dynatec's MOD-Plus Dyna BF applicator head is an air-operated, single or multi-nozzle hot melt adhesive applicator assembly with an integrated filter cartridge which prevents particulate matter from obstructing flow through the head. It is used with intermittent pressure and constant pressure hot melt adhesive supply units (ASUs).

Each Mod-Plus Dyna BF applicator features on or more adhesive valve modules mounted to a single service block. Each module is opened and closed by air pressure. Springs are used to keep needles closed when no air pressure is supplied to the head. The rate of adhesive flow from the applicator is determined by the adhesive pressure applied by the ASU's pump and the size of the nozzle orifice.

The applicator is heated by replacable cartridge heating elements which are controlled by intergrated RTD sensor and electronic control.

ITW Dynatec's BF Micro Applicator is an air-operated, single-nozzle hot melt adhesive applicator assembly with an integrated filter cartridge which prevents particulate matter from obstructing flow through the head. It is used with intermittent pressure and constant pressure hot melt adhesive supply units (ASUs).

Each applicator features one Micro Optima module mounted to a single service block. The module is "optimized" (self-cleaning). It's nozzle is integrated into the module, making it maintenance free. The Micro Optima module is designed for high speed/high pressure (above 400 psi) applications where a sharp cutoff is necessary.

The applicator is heated by replaceable cartridge heating elements which are controlled by an integrated RTD sensor and electronic control.

The applicator is heated by replaceable cartridge heating elements which are controlled by integrated RTD sensor and electronic control.

ITW Dynatec's Mod-Plus Electric Applicator Head is an electrically operated, single or multi-nozzle hot melt adhesive applicator assembly with an integrated filter cartridge that prevents particulate matter from obstructing flow through the head. It is used with intermittent adhesive pressure and constant adhesive pressure hot melt adhesive supply units (ASUs).

Each Mod-Plus Electric applicator features one to four adhesive valve modules mounted to a single service block. Each module is opened and closed by an electric solenoid. Springs are used to keep the valve closed when no electric signal is supplied to the solenoid. The rate of adhesive flow from the applicator is determined by the adhesive pressure applied by the ASU's pump, the size of the nozzle orifice and the stem stroke adjustment.

The applicator is heated by replaceable cartridge heating elements which are controlled by an integrated RTD sensor and electronic control.

The MR1300 Slot Die Applicator is manufactured to precise industry specifications and is comprised of the highest quality materials for long-lasting and extended life.  Astro Packaging carries a complete line of hot melt adhesive systems and custom components which include hot melt units, pumps, motors, heated hoses, modular guns, gun modules, glue nozzles and much more. MR1300 Slot Die Applicator is durable, reliable, and industry compatible and carries a full warranty.

Over 40 years combined experience as authorized representatives for Nordson®, Slautterback®, ITW/Dynatec® and Graco® has given Astro Packaging the knowledge to provide our customers with unparalleled sales and service.  Astro Packaging is one of the largest manufacturers of hot melt adhesive systems and replacement parts in all of North America. Our extensive inventory enables us to ship anywhere in the world overnight. With our industry trained staff, and complete line of hot melt equipment, we are able to design and support a wide variety of packaging systems to meet your specific requirements.

In addition to MR1300 Slot Die Applicator, Astro Packaging also provides custom products built specifically to meet a customer’s specifications. These professional hotmelt adhesive products can be manufactured and delivered in as little as two weeks. Call our toll free number 800-642-7876 for more information or to order MR1300 Slot Die Applicator.

ITW Dynatec's MR1300 High Flow Slot Die adhesive Applicator Head is and air-operated, singgle-module, hot melt adhesive applicator assembly commonly used in the pinch-bottom bag industry. A choice of bracketry allows setup for right or left hand or up or down apply applications, depending on requirements.

The applicator is heated by replaceable cartridge heating elements which are controlled by an intergrated RTD sensor and electronic control. High Flow applicators are available configured for ITW Dynatec's DyanControl, MTC/CompuVision or Allen-Bradley PLC controls.

The Folder Gluer Application Equipment is manufactured to precise industry specifications and is comprised of the highest quality materials for long-lasting and extended life.  Astro Packaging carries a complete line of hot melt adhesive systems and custom components which include hot melt units, pumps, motors, heated hoses, modular guns, gun modules, glue nozzles and much more. Folder Gluer Application Equipment is durable, reliable, and industry compatible and carries a full warranty.

Over 40 years combined experience as authorized representatives for Nordson®, Slautterback®, ITW/Dynatec® and Graco® has given Astro Packaging the knowledge to provide our customers with unparalleled sales and service.  Astro Packaging is one of the largest manufacturers of hot melt adhesive systems and replacement parts in all of North America. Our extensive inventory enables us to ship anywhere in the world overnight. With our industry trained staff, and complete line of hot melt equipment, we are able to design and support a wide variety of packaging systems to meet your specific requirements.

In addition to Folder Gluer Application Equipment, Astro Packaging also provides custom products built specifically to meet a customer’s specifications. These professional hotmelt adhesive products can be manufactured and delivered in as little as two weeks. Call our toll free number 800-642-7876 for more information or to order Folder Gluer Application Equipment.

The Innovative Laminated Plate Technology (LPT) is manufactured to precise industry specifications and is comprised of the highest quality materials for long-lasting and extended life. Astro Packaging carries a complete line of hot melt adhesive systems and custom components which include hot melt units, pumps, motors, heated hoses, modular guns, gun modules, glue nozzles and much more. Innovative Laminated Plate Technology (LPT) is durable, reliable, and industry compatible and carries a full warranty.

Over 40 years combined experience as authorized representatives for Nordson®, Slautterback®, ITW/Dynatec® and Graco® has given Astro Packaging the knowledge to provide our customers with unparalleled sales and service. Astro Packaging is one of the largest manufacturers of hot melt adhesive systems and replacement parts in all of North America. Our extensive inventory enables us to ship anywhere in the world overnight. With our industry trained staff, and complete line of hot melt equipment, we are able to design and support a wide variety of packaging systems to meet your specific requirements.

In addition to Innovative Laminated Plate Technology (LPT), Astro Packaging also provides custom products built specifically to meet a customer’s specifications. These professional hotmelt adhesive products can be manufactured and delivered in as little as two weeks. Call our toll free number 800-642-7876 for more information or to order Innovative Laminated Plate Technology (LPT).