Heavy Duty, All Electric, Modular Applicator

The all electric M100 Modular head offers the versatility of attaching one to eight valve modules to a single heated manifold. The M100 Series extrudes beads or dots of adhesive or other thermoplastic material for a wide range of packaging and product assembly applications. Depending on flow requirements, the manifold connects to a no.6 or 8 heated supply hose. The M100 Series can be configured for AC or DC signals to energize the electric coil on standard or high speed valve modules.

The M100 Series allows a user to specify the number and spacing of modules needed for a specific application. The spacing from nozzle tip to nozzle tip can be as close as 1.75 inches (44.45 mm) or up to a total manifold width of 24 inches (609.60 mm).

Two screws attach valve modules to the manifold for quick removal or replacement. Components are derived from the proven valve, coil and nozzle assembly of the Slautterback E100 head. The M100 Series eliminates the need for compressed air or a complex valving mechanism. The valving assembly consists of a single moving part, two static o-rings and a solenoid mounted on the valve block. The valve modules use standard E100 nozzles.

Features:

• All electric operation
• Modular design
• Application specific spacing- no adjustment required
• RTD sensor for accurate temperature control
• Up to eight valve modules on a single heated manifold
• Only one moving part per valve module
• No air valves, solenoids, air lines, filters, regulators or condensation problems
• Speeds up to 6000 cycles per minute depending on viscosity, temperature and material
• Heavy duty manifold filter reduces nozzle plugging
• Performance comparable to industry standard, all electric E100s
• Valves, coils and nozzle assemblies service proven on E100 heads

Specifications:

PHYSICAL Weight Depends on configuration and number of valve modules Mounting Manifold specific Fittings male no.6 or 8 JIC Temperature Control RTD Sensor and T-Series solid state controller range from 100-450 F (38-232 C). Accuracy depends on controller selected. T500/750/1000 accuracy is 1F (1 C) PERFORMANCE Viscosity 25,000 Centipoise Maximum          *Consult sales representative for higher viscosity's Warm-up Time 15 Minutes Adhesive Operating Pressure 50-800 psi (345-5516 kPa) Pressures above 500 psi require a Slautterback Head Driver

ELECTRICAL Heaters 230 VAC Solenoid coil 230 VAC, 90 W OPTIONS Up to 4 coil sets for 4 independent adhesive patterns Filter with 24, 50, 100 or 200 mesh Module blanking kits